

Minimize operating costs and dependence on diesel fuels with our Canadian made, 5kW Vertical Axis Wind Turbine (VAWT) Solution. This system can tie into your existing battery banks and/or generator(s) and optimize your power generation. This will greatly reduce your need for constant diesel fuel and transportation costs to a generator.
A reoccurring issue that many Vertical Axis Wind Turbines run into is being able to efficiently pull energy that has been created without putting too much demand on the turbine that will cause it to then stall. Our Turbine is controlled by our own custom controller to ensure a smooth and accurate DC voltage that will ensure a constant flow of energy with the prevailing wind flow and no loss of energy; this is because we have reengineered and improved the power curve that most VAWT's use.
| Turbine: | Savonius-Darrieus Hybrid (drag-lift) will take wind from any direction |
| Maintenance Requirements: | Low (1 sealed bearing / Auto greaser standard equipment) |
| Expected Life: | 15-25 years |
| Vibration: | Minimal vibration |
| Warranty: | 2 years |
| Generation Capacity: | 5000 Watts |
| Turbine Output: | 1 - 5000 Watts AC 3 Phase |
| Average Rated Wind Speed: | 5Kw @ 11m/s |
| Rotation begins at: | 2m/s wind speed |
| Generation begins at: | 3m/s wind speed |
| Cut off Wind Speed: | 70mph / 145 km/h |
| Operating RPM: | 70 - 100 RPM |
| Braking System: | ANA-5000 Over Rotate Control System, designed to keep the turbine operating under 120 RPM up to 145 km/hr |
| Configuration: | Three wind blades mounted directly to generator |
| Blades: | Powder Coated |
| Noise: | 65db @ 15ft (4.5m) |
| Height of Blades: | 192 in / 488 cm |
| Blade Depth: | 29 in / 74 cm |
| Blade Width: | 10 in / 25 cm |
| Diameter of Turbine with Blades: | 78 in / 198 cm |
| Circumference: | 292 in / 742 cm |
| Weight of Turbine: | 1030 lbs / 468 kg |
Durability tested in Canada's harsh winters and hot summers with temperatures ranging from -45 to +40 degrees Celsius. Our turbines have gone through multiple durability and output test to ensure the engineering and mechanics of each turbine are of the highest quality. We currently have turbines in testing at the Red River College wind tunnel facility.
The Kynetic Energy 5kW VAWT (Vertical Axis Wind Turbine) is extremely durable and will last a long time as it does not have a drive shaft or gearbox; it also doesn't have brushes, bushings, or slip rings. The only moving part it has is one sturdy long-life bearing which makes this an ideal product for various applications.
This turbine's design offers users little to no required maintenance and an expected life span of up to 25 years, with 2 years of warranty coverage against defective products and workmanship.
All Kynetic Energy Turbines are installed with an ANA-5000 Wind Controller to ensure they do not over rotate in extreme wind conditions up to 145 km/hr since these speeds can damage most vertical axis wind turbines. This controller will keep the VAWT turbine operating under 120 RPM as a safety precaution.